Savage 325 Salvage - Printable Version +- A Community for Firearms Enthusiasts & 2nd Amendment Protection (https://utahguns.net/forum) +-- Forum: Firearms Discussion (https://utahguns.net/forum/forumdisplay.php?fid=6) +--- Forum: Curio & Relic/Black Powder (https://utahguns.net/forum/forumdisplay.php?fid=10) +--- Thread: Savage 325 Salvage (/showthread.php?tid=155)

Savage 325 Salvage - echo1 - 03-12-2023 Hi Fellow C&R Junkies, Quite some time ago, I picked up this Stevens 325 with a group of rifles and parts from an estate. I really had no idea what the heck they were, and never knew there was such a thing as a .30-30 bolt gun. The stock was in very poor condition, the gas shield clips were bent (which had the bolt jammed), and of course it had never been cleaned. I was able to persuade the bolt out, and save the mechanicals. I often wonder how people could treat ANY civilian fire arm so badly. The wood had dents, gouges, and deep scratches. It took quite a bit of sanding and steam, and then I just had to say it was as good as it was gonna get. While LGS dumpster diving, I found a recoil pad that would be a close enough fit, with a little trim off the butt and pad both, and a nice era correct basket weave sling. I added the swivels. Some Old English and syth oil on the furniture, a splash of olive oil on the dried up sling, and viola, good loner gun or first time center fire shooter rifle. The final item needing addressed is the rear sight. It has a crack that needs braised. Came with an extra mag, and the pointy boolits I picked up garage sailing. I know I've committed a mortal C&R sin with sanding and saw, but it lives to kill again. PAX Savage 325 Salvage - Bako - 03-12-2023 There is no mortal sin when bringing a C&R back from the dead. Nice work on a beautiful piece of history!